JF Test Socket Design Requisition

Note: Any data entered into the form will be treated confidentially and used only for internal purposes.

Project Request Form for JF Technology Test Sockets Time to Complete: Approx 5 - 10 Mins

This questionnaire is comprised of 7 sections.

About you and your company

Your Full Name

This question is required

Your Company's Name/ Location

This question is required

Your contact phone number

This question is required

Your email address

This question is required

Please provide any additional information not mentioned elsewhere here

About your need

Your device part number or description

Required Contact Solution / Technology - if known

Select from our standard pin solutions. Please let us know if you need assistance or details

Item wanted

Do you have any major issues?

Required quantity ?

Please clarify in Pieces or Sets

Usage per month (Pcs/ Set)

Package Type

Package style

Body Size

Please clarify in mm or mil

Pitch

Please note that this must be in mm

Number of leads/balls

Special pad type

i.e. QFN/DFN

Lead/ Pad/ Balls plating

E-pad required

Ground contact pin required

MA (Manual Actuator) to be used on socket type

Initial drawing / footprint required date

Note: A small NRE (Non Recurring Engineering) charge for initial drawings may be be due. This covers the time spent on initial design. You will be advised once we asses the project Expedited responses are possible

Electrical & Magnetic Properties

Device application: Discrete, Analog, Mixed Signal, Logic, RF, etc.

Current rating (Ampere)

Current pulsed or continuous

Resistance (Ohm)

Inductance (Henry)

Capacitance (Farad)

Leakage current (Ampere)

Frequency (GHz)

Device test time (Seconds)

Electrostatic discharge (Ohm)

Mechanical Properties

Contact force (per contact) (Grams)

Deflection (mm)

Contact wipe on pad (mm)

Contact required lifespan in K / 000 insertions

Elastomer required lifespan (K / 000's insertions)

Testing Environment

Test Method

Type of contactor

Temperature range (⁰C)

Handler manufacturer / OEM

Handler platform

Handler model

Number of test sites

(Handler - i.e. quad, dual , single)

If multiple test site, please specify the number

Inlet information

Handler or chamber pressure

Please specify Atm/Psi/Pa/Bar

Handler or chamber velocity

Please note in m/s

Handler or Chamber Volume Flow Rate

Please note m3/s

Soaking time

In seconds

JF Test Socket Design Requisition

About you and your company

Your Full Name

Your Company's Name/ Location

Your contact phone number

Your email address

Please provide any additional information not mentioned elsewhere here

About your need

Your device part number or description

Required Contact Solution / Technology - if known

Item wanted

Do you have any major issues?

Required quantity ?

Usage per month (Pcs/ Set)

Package Type

Package style

Body Size

Pitch

Number of leads/balls

Special pad type

Lead/ Pad/ Balls plating

E-pad required

Ground contact pin required

MA (Manual Actuator) to be used on socket type

Initial drawing / footprint required date

Electrical & Magnetic Properties

Device application: Discrete, Analog, Mixed Signal, Logic, RF, etc.

Current rating (Ampere)

Current pulsed or continuous

Resistance (Ohm)

Inductance (Henry)

Capacitance (Farad)

Leakage current (Ampere)

Frequency (GHz)

Device test time (Seconds)

Electrostatic discharge (Ohm)

Mechanical Properties

Contact force (per contact) (Grams)

Deflection (mm)

Contact wipe on pad (mm)

Contact required lifespan in K / 000 insertions

Elastomer required lifespan (K / 000's insertions)

Testing Environment

Test Method

Type of contactor

Temperature range (⁰C)

Handler manufacturer / OEM

Handler platform

Handler model

Number of test sites

If multiple test site, please specify the number

Inlet information

Handler or chamber pressure

Handler or chamber velocity

Handler or Chamber Volume Flow Rate

Soaking time

Physical Samples & Information

Upload drawing (POD)

Upload loadboard footprint

Can you provide Sample Devices - ideally up to 10 to test tolerance spread - but as many as that can be spared should be sent to the factory

Do samples need to be returned

Any other information

Any requirements/issues not covered by the questions above

Special instructions